Details

---

BUY TLV1701AIDBVT https://www.utsource.net/itm/p/7263613.html
Comparator Single R-R I/P ±18V/36V Automotive Medical 5-Pin SOT-23 T/R

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous Operation	1.6	-	3.6	V
Input Offset Voltage	VIO	VCM = 0.5V to VCC - 0.5V	-2	0.8	2	mV
Input Bias Current	IB	VCM = 0.5V to VCC - 0.5V	-	20	-	pA
Input Offset Current	IIO	VCM = 0.5V to VCC - 0.5V	-	4	-	pA
Slew Rate	SR	Small Signal	-	0.4	-	V/μs
Gain Bandwidth Product	GBP	-	-	1.9	-	MHz
Power Supply Rejection Ratio	PSRR	f = 120Hz	-	85	-	dB
Common Mode Rejection Ratio	CMRR	VCM = 0.5V to VCC - 0.5V	-	90	-	dB

Instructions for Use:

1. Power Supply: Ensure the supply voltage (V_CC) is within the specified range of 1.6V to 3.6V.
2. Input Signals: Keep input common-mode voltage (V_CM) between 0.5V and V_CC - 0.5V to avoid exceeding the input voltage range.
3. Biasing: Account for the input bias current, which can affect circuit performance, especially in high-impedance applications.
4. Slew Rate Consideration: For applications requiring fast signal transitions, consider the slew rate limitation of 0.4 V/μs.
5. Frequency Response: Utilize the gain bandwidth product (GBP) of 1.9 MHz to design circuits that operate within stable frequency ranges.
6. Noise Sensitivity: Be mindful of power supply rejection ratio (PSRR) and common mode rejection ratio (CMRR) to minimize noise influence from power supplies and differential inputs.
7. Handling Precautions: Follow standard handling procedures for electrostatic sensitive devices to prevent damage.

For detailed specifications and additional information, refer to the manufacturer's datasheet.

(For reference only)