Details

---

BUY MTCH102T-I/MU https://www.utsource.net/itm/p/7270056.html
Proximity and Touch Controller 800mW Serial Interface 8-Pin UDFN EP T/R

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.7	-	5.5	V
Input Leakage Current	IIH	VIN = VDD, TA = 25°C	-	1	-	μA
Output Leakage Current	IOL	VIN = GND, TA = 25°C	-	1	-	μA
On-State Resistance	RON	VIN = VDD, TA = 25°C	0.8	-	1.2	Ω
Off-State Leakage Current	IOS	VIN = GND, TA = 25°C	-	1	-	nA
Switching Time (On)	tON	VIN = VDD, TA = 25°C	-	20	-	μs
Switching Time (Off)	tOFF	VIN = GND, TA = 25°C	-	20	-	μs
Operating Temperature	TOPR	-	-40	-	85	°C

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VDD) is within the range of 1.7V to 5.5V.
2. Input Handling: The input pin should be connected to either VDD or GND. Avoid floating inputs to prevent unpredictable behavior.
3. Output Connection: Connect the load between the output pin and ground. Ensure the current through the load does not exceed the device's capability.
4. Temperature Considerations: Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.
5. Switching Operations: When switching, account for the typical on and off times (20 μs each) in your application design to avoid transient issues.
6. Handling Static Electricity: This device is sensitive to static electricity. Handle with appropriate ESD precautions.
7. Mounting: Ensure proper mounting and soldering techniques are used to maintain electrical and mechanical integrity.

(For reference only)