Details

---

BUY RGL34K-E3/98 https://www.utsource.net/itm/p/7270566.html
Small Signal Switching Diodes, Vishay Semiconductor

Parameter	Description	Value
Part Number	Unique identifier for the component	RGL34K-E3/98
Type	Type of device	Relay
Coil Voltage	Voltage required to activate the relay	24V AC/DC
Contact Form	Configuration of the contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Coil Resistance	Resistance of the coil	1.6kΩ
Operating Temp.	Temperature range in which the relay can operate	-40°C to +85°C
Insulation Voltage	Maximum voltage the insulation can withstand	2500VAC
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure	100,000 cycles

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that maintains the operating temperature range.
   • Secure the relay using the provided mounting hardware to prevent vibration damage.

2. Wiring:

   • Connect the coil terminals to the appropriate control voltage.
   • Wire the contact terminals according to the circuit requirements (common, normally open, normally closed).

3. Operation:

   • Apply the rated coil voltage to activate the relay.
   • Verify the contacts switch as expected under load conditions.

4. Maintenance:

   • Regularly inspect connections for corrosion or looseness.
   • Replace the relay if it fails to operate correctly or reaches its end of life cycle.

5. Safety Precautions:

   • Disconnect power before performing any maintenance or wiring changes.
   • Use appropriate personal protective equipment when handling electrical components.

(For reference only)