Details

---

BUY DZ2S180C0L https://www.utsource.net/itm/p/7272028.html
TVS Dual Common Anode Zeners, Panasonic Dual Surface Mount TVS in Common Anode Configuration Ideally Suited for Automated Insertion Low Leakage

Parameter	Description	Value	Unit
Part Number	Device Identifier	DZ2S180C0L	-
Type	Device Type	Zener Diode	-
Voltage (Vz)	Zener Voltage at specified test current	18.0	V
Power Dissipation	Maximum Power Dissipation	500	mW
Current (Iz)	Zener Test Current	5	mA
Reverse Current	Maximum Reverse Current at Vr	1	μA
Operating Temp.	Operating Temperature Range	-55 to +175	°C
Package	Package Type	SOD-323	-

Instructions for Use:

1. Mounting and Handling:

   • Handle with care to avoid damage to the leads or body.
   • Ensure correct orientation during mounting to prevent short circuits.

2. Soldering:

   • Use a temperature-controlled soldering iron not exceeding 300°C.
   • Limit soldering time to less than 10 seconds per operation.
   • Allow adequate cooling after soldering.

3. Electrical Connections:

   • Connect the diode in the circuit according to the polarity indicated on the component.
   • Ensure that the maximum ratings are not exceeded, particularly the power dissipation and reverse voltage limits.

4. Storage:

   • Store in a dry environment away from direct sunlight.
   • Keep components in original packaging until ready for use to minimize static damage.

5. Testing:

   • Before installing, verify the Zener voltage using a suitable tester.
   • Check for any leakage currents which could indicate a faulty component.

6. Safety Precautions:

   • Always refer to the datasheet for detailed specifications and safety guidelines.
   • Use appropriate protective equipment when handling electrical components.

(For reference only)