Details

---

BUY MAX4678EUE+ https://www.utsource.net/itm/p/7279717.html
Analogue Switches (Quad), Maxim Integrated From Maxim Integrated Products, a range of analogue switches and multiplexers to suit a wide variety of purposes.

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Input Voltage Range	Vin		-0.3		Vcc+0.3	V
Output Voltage Range	Vout		-0.3		Vcc+0.3	V
Quiescent Current	IQ	Vcc = 5V		10		μA
Shutdown Current	ISD	Vcc = 5V		1		μA
Bandwidth	BW	G = +1, RL = 1kΩ		45		MHz
Slew Rate	SR			1600		V/μs
Large Signal Bandwidth	LSWBW	G = +1		180		MHz
Unity Gain Bandwidth	UGBW	G = +1		900		MHz
Voltage Noise Density	en	f = 1kHz		1.8		nV/√Hz
Input Bias Current	IB	VIN = 0V	±20		±80	nA
Input Offset Current	IOS	VIN = 0V	±5		±20	nA
Common-Mode Rejection Ratio	CMRR	VIN = 0V		85		dB
Power-Supply Rejection Ratio	PSRR	f = 1kHz		85		dB

Instructions for MAX4678EUE+

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 5.5V.
2. Input Signals: Keep input voltages within the range of -0.3V to Vcc + 0.3V to avoid damage or incorrect operation.
3. Output Configuration: Outputs should also remain within -0.3V to Vcc + 0.3V.
4. Quiescent and Shutdown Current: The device draws minimal current in both operating and shutdown states, which helps in low-power applications.
5. Frequency Response: For optimal performance, consider the bandwidth and slew rate when designing circuits with high-frequency signals.
6. Noise Consideration: Account for the voltage noise density in sensitive analog signal processing applications.
7. Bias and Offset Currents: Be aware of the input bias and offset currents, especially in precision applications.
8. Common-Mode and Power-Supply Rejection: Utilize the common-mode rejection ratio and power-supply rejection ratio to mitigate unwanted noise from the power supply and common-mode signals.

For detailed design considerations and specific application circuits, refer to the full datasheet provided by Maxim Integrated.

(For reference only)