Details

---

BUY SPD30P06PGBTMA1 https://www.utsource.net/itm/p/7299259.html
Trans MOSFET P-CH 60V 30A Automotive 3-Pin(2+Tab) DPAK T/R

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	Vin		4.5		30	V
Continuous Output Current	Iout	Ta = 25°C		6.0		A
Peak Output Current	Iout(p)	Tj = 150°C		12		A
Output Voltage	Vout	No Load		0.95V	1.05V	V
Quiescent Current	Iq	Vin = 30V, No Load		70		μA
Dropout Voltage	Vd	Iout = 3A		0.8		V
Junction Temperature	Tj		-40		150	°C
Storage Temperature	Tstg		-40		150	°C

Instructions:

1. Power Supply Requirements: Ensure the input voltage is within the specified range of 4.5V to 30V.
2. Current Handling: The device can handle a continuous output current up to 6A at an ambient temperature of 25°C. For peak conditions, it can handle up to 12A at a junction temperature of 150°C.
3. Output Voltage Regulation: The output voltage should be regulated between 0.95V and 1.05V under no load conditions.
4. Quiescent Current Management: At 30V input and no load, the quiescent current should not exceed 70μA.
5. Dropout Voltage Consideration: When operating with an output current of 3A, ensure the dropout voltage does not exceed 0.8V.
6. Temperature Limits: Operate the device within the specified junction and storage temperature ranges to avoid damage or malfunction.
7. Mounting and Heat Dissipation: Adequate heat dissipation mechanisms should be in place, especially when operating near the maximum current and temperature limits.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed information.

(For reference only)