Details

---

BUY MA8330-H https://www.utsource.net/itm/p/7319286.html
MA8330-H Zener Diode SOD323/0805-33V MARKING 33

Parameter	Description	Value
Part Number	MA8330-H
Type	Hall Effect Sensor
Output Type	Digital Output
Supply Voltage	Operating voltage range	3.3V to 5.5V
Quiescent Current	Current consumption in standby mode	< 10 μA
Operating Temp.	Temperature range for operation	-40°C to 85°C
Output Signal	Output signal when magnetic field detected	High (Vcc) or Low (GND)
Magnetic Sensitivity	Magnetic field strength required to switch output	25 Gauss (Bop/B rp)
Response Time	Time taken to change output state after detecting magnetic field	< 1 ms
Package Type	Encapsulation type	SOT-23

Instructions:

1. Power Supply Connection: Connect the Vcc pin to a power supply within the operating voltage range and GND pin to ground.
2. Signal Detection: Ensure the sensor is placed where it can detect the magnetic field effectively. The sensor will provide a digital output based on the presence or absence of the magnetic field.
3. Handling Precautions: Handle with care to avoid damage from electrostatic discharge (ESD). Use appropriate ESD protection measures.
4. Installation: Mount the sensor ensuring it is securely fastened and aligned correctly for optimal magnetic field detection.
5. Testing: Before final installation, test the sensor in an environment similar to its intended application to ensure proper functionality.

(For reference only)