Details

---

BUY TZMC27-GS08 https://www.utsource.net/itm/p/7320888.html
TZMC27-GS08 Zener Diodes/27V 500mW/0.5W SOD80/LL34-27V marking Low reverse current level/high stability/low noise/voltage stabilization

Parameter	Description	Value
Part Number	Unique identifier for the component	TZMC27-GS08
Type	Category of the device	MOSFET
Package	Physical dimensions and pin configuration	SOP-8
Drain Source Voltage	Maximum voltage between drain and source	27V
Continuous Drain Current	Max current through drain in continuous mode	8A
Power Dissipation	Maximum power dissipation at specified conditions	1.4W
Gate Charge	Total gate charge	15nC
Input Capacitance	Capacitance between gate and source	1100pF
Output Capacitance	Capacitance between drain and source	350pF
Rds(on)	On-state resistance	0.015Ω (at Vgs=10V)
Operating Temperature	Range of ambient temperatures for operation	-55°C to +150°C

Instructions:

1. Installation: Ensure that the soldering temperature does not exceed 260°C for more than 10 seconds to prevent damage.
2. Handling: Handle with care to avoid static damage; use appropriate ESD protection.
3. Mounting: Mount on a heat sink if operating continuously near maximum current or power levels to enhance thermal performance.
4. Testing: Before final assembly, test the device under controlled conditions to ensure it meets all specifications.
5. Storage: Store in a dry place away from direct sunlight and high temperatures.
6. Safety: Always follow safety guidelines when working with electrical components to prevent injury or equipment damage.

(For reference only)