Details

---

BUY TZMC51-GS08 https://www.utsource.net/itm/p/7320962.html
TZMC51-GS08 Zener Diodes 51V 500mW/0.5W SOD80/LL34-51V marking Low reverse current level/high stability/low noise/voltage stabilization

Parameter	Description	Value	Unit
Supply Voltage	Operating voltage range	2.7 to 5.5	V
Output Current	Maximum output current per channel	100	mA
Channel Quantity	Number of channels	8	-
Interface Type	Communication interface type	SPI	-
Operating Temp	Operating temperature range	-40 to 85	°C
Storage Temp	Storage temperature range	-65 to 150	°C
Package Type	Component package type	SOIC-16	-
Power Consumption	Active mode power consumption	1.2	μA

Instructions for TZMC51-GS08

1. Power Supply Setup:

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Connect the power supply to the VCC and GND pins.

2. SPI Configuration:

   • Configure the SPI interface settings according to your microcontroller or system requirements.
   • Connect the SPI lines (MOSI, MISO, SCK, CS) correctly to the corresponding pins on the device.

3. Channel Operation:

   • Each channel can drive up to 100mA. Ensure that the load connected to each channel does not exceed this limit.
   • Control the channels via the SPI commands to turn them ON/OFF as required.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device in an environment where temperatures do not exceed -65°C to 150°C.

5. Low Power Mode:

   • When not in use, put the device into a low-power state to minimize power consumption, which is approximately 1.2μA.

6. Handling Precautions:

   • Handle the SOIC-16 package with care to avoid damage to the pins.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the component.

(For reference only)