Details

---

BUY ATV750L-25GM/883 https://www.utsource.net/itm/p/7329295.html

Parameter	Description
Model Number	ATV750L-25GM/883
Type	Variable Speed Drive
Power Range	0.75 kW to 250 kW
Voltage Range	200 - 240 V / 380 - 480 V
Current Rating	Depends on the power rating; refer to datasheet for specific values
Frequency Range	0.1 Hz to 600 Hz
Control Method	Vector Control, V/F Control
Communication Protocols	Modbus RTU, CANopen, Profibus-DP, Ethernet/IP (options available)
Environmental Conditions	Operating Temperature: -10°C to +50°C, Humidity: 20% to 95% non-condensing
Protection Class	IP20 (standard), IP54 or IP55 (optional)
Cooling Method	Forced air cooling
Dimensions	Refer to datasheet for exact dimensions
Weight	Refer to datasheet for exact weight

Instructions:

1. Installation:

   • Ensure the drive is installed in a location that meets the environmental conditions specified.
   • Use the appropriate mounting method as per the installation manual.

2. Wiring:

   • Connect the power supply and motor cables according to the wiring diagram provided in the manual.
   • Ensure all connections are secure and insulated properly.

3. Setup:

   • Power up the drive and configure settings using the keypad or connected PC software.
   • Set the control mode (Vector or V/F) based on application requirements.

4. Operation:

   • Start the drive and monitor initial operation for any irregularities.
   • Adjust parameters as necessary through the user interface or programming software.

5. Maintenance:

   • Regularly check connections and ventilation openings for dirt and debris.
   • Follow the maintenance schedule provided in the manual for optimal performance.

6. Safety:

   • Always disconnect power before performing any maintenance or adjustments.
   • Follow all safety guidelines outlined in the manual to prevent injury or damage.

For detailed specifications and additional instructions, refer to the official product datasheet and user manual provided by the manufacturer.

(For reference only)