Details
BUY 74HC4066D(BJ) https://www.utsource.net/itm/p/7420807.html
Circuit IC Switch 14-SOIC
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating Condition | 2.0 | 6.0 | V | |
| Output Leakage Current | IOL | VOUT = 0V | ±1 | μA | ||
| Input Leakage Current | IIH | VIN = VCC | ±1 | μA | ||
| On-State Resistance | RON | 4.0 | 5.0 | 6.0 | Ω | |
| Off-State Resistance | ROFF | 10^9 | Ω | |||
| Propagation Delay Time | tpd | 8 | 20 | ns | ||
| Power Dissipation | PD | 100 | mW |
Instructions for Use:
Power Supply: Ensure the supply voltage (VCC) is within the specified range of 2.0V to 6.0V. Exceeding this range can damage the device.
Signal Levels: The input signals should be compatible with the supply voltage. Inputs higher than VCC or lower than GND can cause improper operation or damage.
Handling Care: This device is sensitive to electrostatic discharge (ESD). Handle with appropriate ESD precautions.
Heat Dissipation: Monitor power dissipation to ensure it does not exceed 100mW to prevent overheating.
Connection Layout: For optimal performance, keep signal paths as short as possible and use bypass capacitors near the power pins.
Switching Characteristics: When using the switches in high-frequency applications, consider the propagation delay time which can vary between 8ns to 20ns.
Off-State Behavior: The off-state resistance is very high, ensuring minimal leakage when the switch is off.
On-State Behavior: Ensure that the on-state resistance is suitable for your application to minimize signal attenuation.
Note: Always refer to the manufacturer's datasheet for the most accurate and detailed specifications and guidelines.
(For reference only)View more about 74HC4066D(BJ) on main site