Details

---

BUY TS3A5017RGYRG4 https://www.utsource.net/itm/p/7421966.html
2 Circuit IC Switch 4:1 12 Ohm 16-VQFN (4x4)

Parameter	Description	Value
Device Type	Multiplexer/DeMultiplexer	Single SPDT Analog Switch
Package	Package Type	RGY (WQFN)
Supply Voltage (Vcc)	Operating Supply Voltage	1.65 V to 3.6 V
On Resistance (Ron)	Maximum On-State Resistance	0.8 Ω (Typical)
Off Leakage Current	Maximum Off-State Leakage Current	±1 nA
Switching Time	Typical Propagation Delay	4 ns (Typical)
Operating Temperature	Temperature Range for Operation	-40°C to +85°C
Input Signal Range	Input Voltage Range	Vss to Vcc
Power Consumption	Quiescent Current	20 μA (Maximum)
Channel Configuration	Number of Channels	1 SPDT
ESD Protection	Human Body Model	2 kV

Instructions for Use:

1. Power Supply Connection: Connect the supply voltage (Vcc) within the specified range of 1.65 V to 3.6 V. Ensure a stable power supply to avoid unexpected behavior.

2. Signal Routing: The TS3A5017RGYRG4 is configured as a single-pole double-throw (SPDT) switch. Connect the input signal to the common terminal and route it through either of the two output terminals based on the control signal applied.

3. Control Logic: Apply a logic high or low to the control pin to switch between the two output channels. Ensure that the control signal levels are compatible with the supply voltage.

4. Handling ESD: Handle the device with care to prevent electrostatic discharge damage. The device has built-in ESD protection up to 2 kV, but precautions should still be taken.

5. Thermal Management: Given the operating temperature range of -40°C to +85°C, ensure proper thermal management if used in extreme environments.

6. Installation: Mount the device according to the recommended footprint and soldering guidelines provided by the manufacturer to ensure reliable operation.

7. Testing: After installation, verify the functionality by testing the switching performance and ensuring that the leakage current remains within specifications.

(For reference only)