AZ2185D-ADJTRG1

AZ2185D-ADJTRG1


Specifications
SKU
7491115
Details

BUY AZ2185D-ADJTRG1 https://www.utsource.net/itm/p/7491115.html
Linear Voltage Regulator IC 1 Output 4.95A TO-252
Parameter Symbol Conditions Min Typ Max Unit
Input Voltage VIN Operating 2.7 - 5.5 V
Output Voltage Range VOUT Adjustable 0.4 - 3.3 V
Output Current IOUT Continuous - 1.5 3 A
Quiescent Current IQ VIN = 5V, No Load - 10 - μA
Dropout Voltage VDROPOUT IOUT = 3A, VIN = 5V - 300 - mV
Power Supply Rejection Ratio PSRR f = 1kHz - 60 - dB
Enable Input Voltage VEN High-Level Active 1.2 - - V

Instructions for AZ2185D-ADJTRG1:

  1. Power Supply Connection:

    • Connect the input voltage (VIN) to the power supply within the specified range of 2.7V to 5.5V.
    • Ensure a stable and clean power source to avoid voltage spikes.
  2. Output Configuration:

    • Adjust the output voltage (VOUT) using external resistors connected to the ADJ pin.
    • The output voltage can be set between 0.4V and 3.3V.
  3. Enable Pin:

    • Apply a voltage greater than 1.2V to the EN pin to activate the device.
    • For shutdown, pull the EN pin below 0.4V.
  4. Thermal Considerations:

    • Ensure adequate heat dissipation if operating at high output currents or in environments with elevated temperatures.
    • Use a heatsink if necessary to maintain safe operating temperatures.
  5. Capacitor Selection:

    • Place input and output capacitors close to the device to ensure stability and reduce noise.
    • Recommended values are typically 1μF ceramic capacitors for both input and output.
  6. PCB Layout:

    • Follow good PCB layout practices to minimize parasitic effects.
    • Keep traces short and wide, especially for ground connections.
  7. Protection Circuits:

    • Implement appropriate protection circuits such as overcurrent and overvoltage protection to safeguard the device and connected components.
  8. Testing:

    • Before final assembly, test the device under various conditions to ensure it meets performance specifications.
    • Verify the quiescent current, dropout voltage, and output regulation.
(For reference only)

View more about AZ2185D-ADJTRG1 on main site