Details

---

BUY 74LVC1G175GW-Q100H https://www.utsource.net/itm/p/7543886.html
IC FF D-TYPE SNGL 1BIT 6TSSOP

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	1.65		5.5	V
Input Low Voltage	VI(L)	VCC = 3.3V	0		0.8	V
Input High Voltage	VI(H)	VCC = 3.3V	2.0		VCC	V
Output Low Voltage	VO(L)	IO = 4mA, VCC = 3.3V	0.1		0.4	V
Output High Voltage	VO(H)	IO = -4mA, VCC = 3.3V	2.4		VCC-0.1	V
Propagation Delay Time	tpd	VCC = 3.3V		5.9		ns
Power Dissipation	PD				250	mW

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VCC) is within the specified range of 1.65V to 5.5V.
2. Input Signal Levels: Verify that input signals are within valid logic levels as per the table above to avoid misinterpretation by the device.
3. Output Load: Keep output current within limits to ensure the output voltages remain within specifications.
4. Propagation Delay: Account for the propagation delay in timing-sensitive applications.
5. Thermal Management: Monitor power dissipation and ensure it does not exceed 250mW to prevent overheating.
6. Handling Precautions: Follow ESD handling guidelines to protect the device from electrostatic damage.

Note: This data is typical and should be verified against the latest datasheet provided by the manufacturer for precise values and additional details.

(For reference only)