Details

---

BUY MC74AC374DWR2 https://www.utsource.net/itm/p/7545578.html
IC FF D-TYPE SNGL 8BIT 20SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0		5.5	V
Output Voltage High	VOH	VCC = 5V, IO = -4mA	2.4		5.0	V
Output Voltage Low	VOL	VCC = 5V, IO = 16mA	0		0.4	V
Input Leakage Current	II	VIN = 0 to VCC	-1		1	μA
Propagation Delay Time	tpd	VCC = 5V		7		ns
Power Dissipation	PD				130	mW

Instructions for MC74AC374DWR2

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V for optimal operation.

2. Signal Levels:

   • The output voltage high (VOH) should be at least 2.4V when VCC is 5V and the output current (IO) is -4mA.
   • The output voltage low (VOL) should not exceed 0.4V when VCC is 5V and IO is 16mA.

3. Input Handling:

   • Keep input leakage current (II) within ±1μA to prevent damage or incorrect operation.

4. Timing Considerations:

   • Account for a propagation delay time (tpd) of approximately 7ns when designing circuits with this device.

5. Power Management:

   • Be mindful of the power dissipation limit (PD) of 130mW to avoid overheating.

6. Handling Precautions:

   • Handle the component with care to avoid static damage. Use proper ESD protection measures.

7. Installation:

   • Ensure proper installation on the PCB to maintain electrical performance and reliability. Follow standard surface mount technology (SMT) guidelines.

8. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat to preserve functionality.

(For reference only)