Details

---

BUY AD8033ARZ-REEL https://www.utsource.net/itm/p/7562700.html
Voltage Feedback Amplifier 1 Circuit Rail-to-Rail 8-SOIC

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.7		5.5	V	Operating supply voltage range
Supply Current	ICC		1.6		mA	Quiescent current at VS = 5V, RL = 1kΩ
Input Offset Voltage	VIO		1.0		mV	Differential input offset voltage
Input Bias Current	IB		1.0		pA	Average input bias current
Input Voltage Noise	en		1.8		nV/√Hz	Voltage noise density
Slew Rate	SR		450		V/μs	Rate of change of output voltage
Bandwidth (-3dB)	BW		180		MHz	Small signal bandwidth
Large Signal Bandwidth	LBW		90		MHz	Large signal bandwidth (2Vpp)
Rise Time	tr		1.2		ns	Rise time for a 2V step
Fall Time	tf		1.2		ns	Fall time for a 2V step
Output Voltage Swing	VOS		±2.8		V	Output swing from rail (VS = 5V)
Power-Down Mode Current	Ipd		0.5		μA	Current in power-down mode

Instructions:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Use bypass capacitors close to the power pins for stability.

2. Input Signals:

   • Keep input signals within the common-mode voltage range to avoid distortion.
   • Use appropriate termination resistors for high-frequency applications.

3. Output Load:

   • Ensure the load resistance and capacitance are within the operational limits to maintain performance.
   • For optimal performance, match the output impedance with the load.

4. Power-Down Mode:

   • To enter power-down mode, pull the shutdown pin low.
   • In this mode, the device consumes less than 0.5 μA.

5. Installation and Handling:

   • Handle with care to avoid ESD damage.
   • Follow standard PCB layout practices for RF components.

6. Storage and Packaging:

   • Store in a dry environment away from direct sunlight.
   • The AD8033ARZ-REEL comes in a tape and reel package suitable for automated assembly processes.

(For reference only)