Details

---

BUY MC68EC000FN16 https://www.utsource.net/itm/p/7566184.html

Parameter	Description	Value	Unit
Package Type	Package type	QFP (Quad Flat Package)	-
Pin Count	Number of pins	160	-
Operating Voltage	Supply voltage range	3.3V to 5V	V
Operating Temperature	Temperature range for operation	-40°C to +85°C	°C
Clock Frequency	Maximum clock frequency	20 MHz	MHz
Data Bus Width	Width of the data bus	16-bit or 32-bit	bits
Address Bus Width	Width of the address bus	24-bit	bits
Power Consumption	Typical power consumption	300 mW at 20 MHz, 3.3V supply	mW
Instruction Set	Type of instruction set architecture	Motorola 68000 series	-

Instructions for Use

1. Power Supply Connection:

   • Connect the VCC pin to a stable power supply within the operating voltage range.
   • Ensure the GND pin is properly grounded.

2. Clock Configuration:

   • Connect an external oscillator or crystal to the appropriate clock input pins to achieve the desired clock frequency.

3. Bus Configuration:

   • Configure the data and address buses according to the application requirements. The MC68EC000FN16 supports both 16-bit and 32-bit data buses.

4. Reset and Initialization:

   • Apply a reset signal to the RESET pin before initializing the processor.
   • Follow the initialization sequence as specified in the datasheet to ensure proper startup.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at higher frequencies or in high ambient temperatures.
   • Consider using a heatsink if necessary.

6. Programming:

   • Use compatible development tools and software to program the device.
   • Refer to the programming guide for specific instructions on loading code into memory.

7. Handling Precautions:

   • Handle with care to avoid damage to the pins and package.
   • Follow ESD (Electrostatic Discharge) precautions when handling the component.

For detailed specifications and additional information, refer to the official Motorola (now ON Semiconductor) datasheet for the MC68EC000FN16.

(For reference only)