Details

---

BUY INA828IDR https://www.utsource.net/itm/p/7566616.html
Instrumentation Amplifier 1 Circuit 8-SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	V_S	-	2.7	-	36	V
Input Offset Voltage	V_OS	-	-	50	150	μV
Input Bias Current	I_B	-	-	1	5	pA
Common-Mode Rejection	CMRR	f = 1 kHz	80	-	110	dB
Power Supply Rejection	PSRR	f = 1 kHz	80	-	110	dB
Gain Bandwidth Product	GBP	-	-	1	-	MHz
Slew Rate	SR	-	-	0.4	-	V/μs
Output Voltage Swing	V_O	RL = 10 kΩ, VS = ±15 V	-	±14	-	V
Operating Temperature	T_op	-	-40	-	125	°C

Instructions for INA828IDR

1. Power Supply Connection:

   • Connect the supply voltage (V_S) within the range of 2.7V to 36V. Ensure stable power supply to avoid noise and instability.

2. Input Configuration:

   • Configure the inputs according to your signal requirements. The input bias current is very low, making it suitable for high impedance sources.

3. Output Load:

   • For optimal performance, ensure the output load resistance (RL) does not exceed the recommended values to maintain the specified output voltage swing.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 125°C to ensure reliable performance. Extreme temperatures can affect parameter stability.

5. Noise Reduction:

   • Utilize the high common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) to minimize noise from power supply fluctuations and common-mode signals.

6. Gain Setting:

   • Adjust the gain settings as required by your application, keeping in mind the gain bandwidth product for stability.

7. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

(For reference only)