Details

---

BUY SN74LVC1G14QDCKRQ1 https://www.utsource.net/itm/p/7571422.html
Inverter IC 1 Channel Schmitt Trigger SC-70-5

Parameter	Min	Typ	Max	Unit	Conditions
Supply Voltage (Vcc)	1.65	-	5.5	V
Propagation Delay Time	-	4.2	-	ns	Vcc = 3.3V, TA = 25°C
Input Leakage Current	-	1	-	μA	VI = 0V to Vcc, TA = 25°C
Output Leakage Current	-	1	-	μA	VO = 0V to Vcc, TA = 25°C
Operating Temperature	-40	-	85	°C
Storage Temperature	-65	-	150	°C

Instructions for SN74LVC1G14QDCKRQ1

1. Power Supply Connection:

   • Connect the Vcc pin to a power supply voltage between 1.65V and 5.5V.
   • Ensure the GND pin is connected to ground.

2. Signal Input:

   • Apply the input signal to the D (Data) pin.
   • The device will invert the input signal applied to the D pin and provide the output on the Q pin.

3. Output Handling:

   • The inverted signal from the D pin will be available on the Q pin.
   • Ensure any load connected to the Q pin does not exceed the maximum current rating of the device.

4. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40°C to 85°C).
   • Store the device in environments where the temperature does not exceed the storage temperature limits (-65°C to 150°C).

5. Electrostatic Discharge (ESD) Protection:

   • Handle with care to avoid damage from ESD.
   • Use proper grounding and handling procedures during installation and testing.

6. Mounting:

   • Ensure proper mounting on the PCB to maintain thermal performance and mechanical stability.
   • Follow manufacturer guidelines for soldering and reflow processes.

Note: Always refer to the official datasheet for the most accurate and detailed information specific to your application requirements.

(For reference only)