Details

---

BUY MX25V8035FM2I https://www.utsource.net/itm/p/7577240.html
FLASH - NOR Memory IC 8Mb (1M x 8) SPI 108MHz 8-SOP

Parameter	Description	Value
Device Type	Serial Flash Memory	MX25V8035FM2I
Memory Size	Total memory size	8 Mbit
Data Organization	Number of bits per word	8-bit
Package Type	Package form factor	WSON (16-pin)
Operating Voltage	Supply voltage range	1.7V to 1.95V
Operating Temperature Range	Temperature range for operation	-40°C to +85°C
Programming Voltage	Voltage required for programming operations	Vpp not required
Interface	Communication interface type	SPI
Clock Frequency	Maximum clock frequency	104 MHz
Write Time	Typical time for page program	2 ms
Erase Time	Typical time for sector/block erase	3 s (block), 30 ms (sector)
Endurance	Number of program/erase cycles	100,000 cycles
Retention	Data retention time	20 years

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified operating range (1.7V to 1.95V).
2. Initialization: After power-up, wait for a stable power supply before starting any SPI communication.
3. SPI Communication: Configure the SPI settings according to the device's requirements, including setting the correct clock frequency (up to 104 MHz).
4. Write Operations: Perform write operations using the Write Enable command followed by the appropriate programming command (e.g., Page Program). Wait for the Write-in-Progress bit to clear before initiating new commands.
5. Erase Operations: Use the Sector Erase or Block Erase commands as needed. Ensure no write operations are in progress before issuing an erase command.
6. Temperature Considerations: Operate within the specified temperature range (-40°C to +85°C) to ensure reliable performance.
7. Endurance Management: Monitor the number of program/erase cycles to stay within the endurance limit (100,000 cycles) to prevent wear-out.
8. Data Retention: Store data in environments conducive to maintaining data integrity over the specified retention period (20 years).

For detailed command sequences and timing diagrams, refer to the datasheet provided by the manufacturer.

(For reference only)