Details

---

BUY MG360V1US41 https://www.utsource.net/itm/p/7637534.html

Parameter	Description	Value	Unit
Input Voltage	Minimum operating voltage	2.7	V
Input Voltage	Maximum operating voltage	5.5	V
Output Current	Continuous output current	3	A
Switching Frequency	Fixed switching frequency	1.2	MHz
Quiescent Current	Operating supply current	80	μA
Shutdown Current	Supply current in shutdown mode	0.1	μA
Efficiency	Typical efficiency at 3.3V input, 3.3V output	90	%
Package	Type of package	SOIC-8
Operating Temperature	Minimum operating temperature	-40	°C
Operating Temperature	Maximum operating temperature	125	°C

Instructions for MG360V1US41:

1. Power Supply Connection:

   • Connect the input voltage between VIN and GND terminals.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Configuration:

   • Connect the load between VOUT and GND.
   • The device can supply up to 3A continuously.

3. Capacitor Requirements:

   • Use a minimum of 1μF ceramic capacitor on the input side for stability.
   • Place a 1μF ceramic capacitor close to the output to ensure stable operation.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near maximum load conditions.
   • The device is suitable for operation from -40°C to 125°C.

5. Shutdown Mode:

   • To enter shutdown mode, pull the EN pin low.
   • In shutdown mode, the supply current drops to approximately 0.1μA.

6. Layout Recommendations:

   • Keep the input and output capacitors as close as possible to the device.
   • Minimize trace lengths for high-frequency nodes to reduce noise.

7. Handling Precautions:

   • Handle with care; the device is sensitive to electrostatic discharge (ESD).
   • Follow standard ESD precautions when handling or soldering the component.

(For reference only)