Details

---

BUY LT1007CS8#PBF https://www.utsource.net/itm/p/7672128.html
In Stock

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage	Operating range of the supply voltage	2.7	-	36	V
Input Offset Voltage	Maximum difference between the inverting and non-inverting input voltages	-	100	-	μV
Input Bias Current	Average input current at both input terminals	-	5	-	nA
Input Offset Current	Difference in bias currents between the two input terminals	-	1	-	nA
Slew Rate	Rate of change of output voltage per unit time	-	0.5	-	V/μs
Bandwidth (-3dB)	Frequency at which gain drops to 0.707 of its low frequency value	-	4.5	-	MHz
Output Current (Short Circuit)	Maximum current that can be supplied without damaging the device	-	25	-	mA
Operating Temperature	Range of temperatures over which the device is specified to operate	-40	-	85	°C

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range of 2.7V to 36V to avoid damage or erratic behavior.

2. Input Signal Handling: Keep input signals within the common-mode input voltage range to prevent saturation or clipping of the output signal.

3. Biasing and Compensation: For optimal performance, especially at high frequencies or with capacitive loads, consider external compensation techniques as detailed in the datasheet.

4. Thermal Management: Operate within the temperature range of -40°C to +85°C. For extended temperature ranges, consult the manufacturer's recommendations.

5. Output Load: Be mindful of the output current capability (up to 25mA short circuit). Do not exceed this limit to avoid potential damage.

6. Handling Electrostatic Discharge (ESD): The LT1007CS8#PBF is sensitive to ESD; use appropriate handling practices such as anti-static wrist straps and packaging.

7. Mounting: Follow recommended PCB layout guidelines provided by the manufacturer to ensure reliable operation and thermal performance.

For more detailed information, refer to the full datasheet available from the manufacturer.

(For reference only)