Details

---

BUY LT1054CS8#PBF https://www.utsource.net/itm/p/7672159.html
In Stock

Parameter	Min	Typ	Max	Unit	Description
Input Voltage			35	V	Maximum input voltage
Output Current		100		mA	Maximum output current
Quiescent Current		2		mA	Supply current with no load
Output Voltage Range	0		35	V	Range of output voltages
Operating Temperature	-40		85	°C	Temperature range for normal operation
Storage Temperature	-65		150	°C	Temperature range for storage
Power Dissipation			1.1	W	Maximum power dissipation
PSRR at 100 Hz		75		dB	Power supply rejection ratio
Line Regulation		0.01		%/V	Change in output voltage due to change in input voltage
Load Regulation		0.1		%/mA	Change in output voltage due to change in load current

Instructions for LT1054CS8#PBF

1. Power Supply Connection:

   • Connect the input voltage within the specified range (up to 35V) to the VIN pin.
   • Ensure the power supply is stable and within the operating temperature range.

2. Output Configuration:

   • Configure the output according to your application needs, keeping the output current within the maximum limit of 100mA.
   • Use appropriate external components such as capacitors and resistors for voltage regulation and filtering.

3. Thermal Management:

   • Keep the device within its operating temperature range (-40°C to 85°C).
   • Ensure adequate heat sinking if operating near maximum power dissipation (1.1W).

4. Bypass Capacitors:

   • Place bypass capacitors close to the power pins to minimize noise and improve stability.
   • Recommended values typically include a 0.1μF ceramic capacitor and a larger electrolytic capacitor (e.g., 10μF).

5. Handling and Storage:

   • Store the device in a controlled environment within the storage temperature range (-65°C to 150°C).
   • Handle with care to avoid damage from electrostatic discharge (ESD).

6. Testing:

   • Before finalizing the design, test the circuit under various conditions including temperature extremes and load variations.
   • Verify that the quiescent current remains within the typical value of 2mA.

7. Compliance and Safety:

   • Ensure compliance with relevant safety standards and regulations.
   • Follow all guidelines provided by the manufacturer for optimal performance and reliability.

(For reference only)