Details

---

BUY NJM3717FM2 https://www.utsource.net/itm/p/7727551.html
IC MOTOR DRIVER BIPOLAR 28PLCC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Quiescent Current	IQ	Vcc = 5V, No Load		30		μA
Output Voltage Swing	Vos	RL = 1kΩ, Vcc = 5V		1.2		V
Input Offset Voltage	Vio	Vcc = 5V	-1	0	1	mV
Input Bias Current	Iib	Vcc = 5V		5		nA
Slew Rate	SR	Vcc = 5V		0.6		V/μs
Gain Bandwidth Product	GBP	Vcc = 5V		1.2		MHz
Common Mode Rejection Ratio	CMRR	Vcc = 5V, f = 1kHz		80		dB
Power Supply Rejection Ratio	PSRR	Vcc = 5V, f = 1kHz		80		dB

Instructions for NJM3717FM2

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the operating range of 2.7V to 5.5V.

2. Quiescent Current:

   • The quiescent current should be monitored to ensure it remains around 30μA at no load conditions with a 5V supply.

3. Output Voltage Swing:

   • For optimal performance, ensure the output voltage swing can reach up to 1.2V under typical conditions with a 1kΩ load and 5V supply.

4. Input Offset Voltage:

   • Maintain the input offset voltage within ±1mV for accurate signal processing.

5. Input Bias Current:

   • Keep the input bias current around 5nA to minimize loading effects on the source.

6. Slew Rate:

   • The slew rate of 0.6V/μs ensures stability in transient response.

7. Gain Bandwidth Product:

   • Utilize the gain bandwidth product of 1.2MHz for frequency-dependent applications.

8. Common Mode Rejection Ratio (CMRR):

   • Aim for a CMRR of 80dB to effectively suppress common-mode signals.

9. Power Supply Rejection Ratio (PSRR):

   • Ensure a PSRR of 80dB to reduce the impact of power supply noise on the output.

10. Handling Precautions:

    • Handle the device with care to avoid damage from electrostatic discharge (ESD).
    • Follow manufacturer guidelines for mounting and soldering to ensure reliable operation.

(For reference only)