Details

---

BUY AT28LV010-20TU https://www.utsource.net/itm/p/7958206.html
IC EEPROM 1M PARALLEL 32TSOP

Parameter	Description	Value
Device Type	Serial EEPROM	AT28LV010-20TU
Memory Size	Total Memory Size	128 Kbit
Organization	Organization	16K x 8
Voltage - Supply (Vcc)	Operating Voltage Range	2.5 V to 5.5 V
Current - Active	Active Current per MHz	1 mA
Current - Standby	Standby Current	1 μA
Speed	Maximum Clock Frequency	10 MHz
Interface	Interface Type	SPI
Package	Package Type	TSSOP
Pin Count	Number of Pins	8
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Endurance	Write Cycles	1,000,000 cycles
Data Retention	Data Retention at 25°C	100 years

Instructions for Use:

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 2.5 V to 5.5 V.
2. Clock Speed: Operate the device at a maximum clock frequency of 10 MHz.
3. Initialization: Before performing any read or write operations, initialize the SPI interface properly.
4. Write Operations: Perform write operations in accordance with the endurance limit of 1,000,000 cycles to avoid premature wear-out.
5. Read Operations: Standard read commands can be used to access data stored in the memory.
6. Temperature Considerations: Ensure the operating temperature stays within -40°C to +85°C to maintain reliable performance.
7. Standby Mode: Utilize the low standby current feature to conserve power when the device is not actively being used.
8. Handling Precautions: Handle the TSSOP package carefully to avoid damage to pins and ensure proper soldering during installation.

For detailed command sequences and specific timing diagrams, refer to the datasheet provided by the manufacturer.

(For reference only)