Details

---

BUY STR16006 https://www.utsource.net/itm/p/8022789.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	600	-	mA	Maximum continuous output current
Quiescent Current	IQ	-	1.5	-	μA	Quiescent current
Dropout Voltage	VDROPOUT	-	300	-	mV	Typical dropout voltage
Shutdown Current	ISD	-	0.1	-	μA	Shutdown mode supply current
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range

Instructions for STR16006

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply within the specified range of 2.7V to 5.5V.
   • Ensure a stable and clean power supply to avoid fluctuations.

2. Output Configuration:

   • The device provides a fixed output voltage of 3.3V.
   • Connect the output (VOUT) to the load ensuring the maximum current does not exceed 600mA.

3. Quiescent Current Consideration:

   • The quiescent current is typically 1.5μA, which helps in minimizing power consumption during normal operation.

4. Dropout Voltage:

   • Maintain an input voltage that is at least 300mV higher than the output voltage to ensure proper regulation.

5. Shutdown Mode:

   • To enter shutdown mode, pull the enable pin low. In this mode, the supply current drops to approximately 0.1μA.

6. Operating Temperature:

   • Ensure the operating environment stays within -40°C to 85°C to maintain reliable performance.

7. Capacitor Selection:

   • Use appropriate input and output capacitors as recommended by the datasheet to stabilize the voltage and reduce ripple.

8. PCB Layout:

   • Keep the layout compact with short traces, especially for the power and ground connections, to minimize noise and improve efficiency.

9. Handling Static Electricity:

   • Handle the component with care to avoid damage from static electricity. Use anti-static precautions when installing or handling the device.

(For reference only)