Details

---

BUY HM628128LFP-8 https://www.utsource.net/itm/p/8035816.html

Parameter	Specifications
Product Name	HM628128LFP-8
Type	CMOS Low-Power Static RAM
Capacity	128K x 8
Package Type	SOP (Small Outline Package)
Pin Count	24
Operating Voltage	VCC: 2.5V to 3.6V
Standby Current	Typically 1 μA at VCC = 3.0V, Ta = 25°C
Active Current	Typically 3 mA at fCLK = 5 MHz, VCC = 3.0V, Ta = 25°C
Access Time	70 ns typical
Data Retention	10 years minimum
Temperature Range	Commercial: 0°C to +70°C
Ordering Information	Tape and Reel Packaging

Instructions for Use:

1. Power Supply Requirements: Ensure the operating voltage is within the specified range of 2.5V to 3.6V. Use appropriate voltage regulators if necessary.
2. Installation: Carefully insert the HM628128LFP-8 into a 24-pin SOP socket or directly onto the PCB, ensuring correct orientation as indicated by the notch or dot on the package.
3. Signal Connections: Connect the address lines (A0-A16), data lines (D0-D7), control signals (CE#, OE#, WE#), and power supply pins according to your system's requirements.
4. Handling Precautions: Handle with care to avoid static damage. Use anti-static wrist straps and mats when handling the device.
5. Testing: After installation, perform a thorough test under various conditions to ensure reliable operation.
6. Storage: Store in original packaging in a dry, cool place away from direct sunlight.

For detailed application notes and further technical support, refer to the manufacturer’s datasheet or contact the supplier.

(For reference only)