Details

---

BUY FCD380N60E https://www.utsource.net/itm/p/8083778.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Blocking Voltage	V(BR)DSS	-	600	-	V	Maximum Drain-to-Source voltage
Continuous Drain Current	ID	-	38	-	A	Continuous Drain Current at Tc = 25°C
Pulse Drain Current	IDM	-	170	-	A	Pulse Drain Current (t=10μs, IGBT off-state)
Total Device Dissipation	PD	-	490	-	W	Total power dissipation at Tc = 25°C
Junction Temperature	TJ	-	-	175	°C	Maximum Junction Temperature
Storage Temperature Range	TSTG	-55	-	150	°C	Operating temperature range
Gate Charge	Qg	50	-	75	nC	Total gate charge
Input Capacitance	Ciss	4500	-	6000	pF	Input capacitance
Output Capacitance	Coss	480	-	600	pF	Output capacitance
Reverse Transfer Capacitance	Crss	120	-	160	pF	Reverse transfer capacitance

Instructions for FCD380N60E

1. Installation and Handling:

   • Handle the device with care to avoid damage to the leads or body.
   • Ensure that all connections are secure and correctly soldered.

2. Power Supply Considerations:

   • Verify that the input voltage does not exceed the maximum blocking voltage (V(BR)DSS).
   • Ensure proper heat sinking if operating near maximum power dissipation (PD).

3. Thermal Management:

   • Monitor junction temperature (TJ) to ensure it stays within safe limits.
   • Use appropriate cooling methods such as heatsinks or fans if necessary.

4. Electrical Connections:

   • Connect the drain terminal to the high-side of the load.
   • Connect the source terminal to the low-side of the load or ground.
   • Apply gate signals carefully to avoid exceeding the gate-source voltage ratings.

5. Testing and Troubleshooting:

   • Test the device under controlled conditions before integrating into a larger system.
   • If issues arise, check connections, voltages, and thermal management first.

6. Safety Precautions:

   • Always adhere to safety guidelines when working with high voltages.
   • Ensure proper insulation and grounding to prevent electrical hazards.

(For reference only)