Details
BUY DB207 https://www.utsource.net/itm/p/8083928.html
| Parameter | Description |
|---|---|
| Part Number | DB207 |
| Type | Diode Bridge |
| Configuration | 4-Pin TO-220 Package |
| Maximum Reverse Voltage (Vr) | 1000V |
| Maximum RMS Voltage (Vrms) | 700V |
| Maximum Average Rectified Output Current (Io) | 7A |
| Peak Surge Current (Ifsm) | 800A for 8.3ms sine-wave half-cycle |
| Junction Temperature Range (Tj) | -55°C to +150°C |
| Storage Temperature Range (Ts) | -55°C to +150°C |
| Operating Temperature Range (Topr) | -55°C to +150°C |
Instructions:
- Installation: Ensure that the DB207 diode bridge is installed in a well-ventilated area to prevent overheating. Follow standard practices for mounting components on a heatsink if necessary.
- Polarity Check: Verify the polarity before installation as incorrect installation can lead to device failure.
- Voltage and Current Ratings: Do not exceed the maximum reverse voltage, RMS voltage, or average rectified output current ratings to avoid damaging the component.
- Surge Handling: The peak surge current rating should only be considered for short durations as specified. Continuous operation at high currents can reduce the lifespan of the component.
- Temperature Considerations: Operate within the specified junction, storage, and operating temperature ranges to ensure reliable performance and longevity.
- Soldering: Use appropriate soldering techniques and temperatures to avoid thermal shock which could damage the diode bridge.
- Inspection: After installation, inspect the connections and the component for any signs of damage or improper seating.
View more about DB207 on main site