Details

---

BUY IS62C1024L-70Q https://www.utsource.net/itm/p/8146580.html

Parameter	Description	Value
Device Type	SRAM (Static Random Access Memory)	IS62C1024L-70Q
Organization	Organization	1M x 8
Supply Voltage (VCC)	Operating supply voltage	3.3V
Access Time (tAA)	Access time from chip select to valid data	70ns
Data Width	Data bus width	8-bit
Package Type	Package type	TSSOP (Thin Small Outline)
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-65°C to +150°C
Standby Current	Current consumption in standby mode	20 μA (typical)
Active Current	Current consumption during active operation	35 mA (typical)

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is set to 3.3V as specified. Deviations can lead to improper operation or damage.

2. Addressing and Data Lines:

   • Connect the address lines (A0-A19) to the microcontroller or processor to specify the memory location.
   • Connect the data lines (D0-D7) to transfer data in and out of the memory.

3. Control Signals:

   • Chip Select (CS): Active low signal to enable the device.
   • Output Enable (OE): Active low signal to enable data output.
   • Write Enable (WE): Active low signal to initiate a write operation.

4. Timing Considerations:

   • Ensure that all control signals meet the timing requirements, especially the access time (tAA), to prevent data corruption.

5. Handling Precautions:

   • Handle with care to avoid static damage. Use proper ESD protection when handling the component.
   • Store in recommended temperature ranges to ensure longevity and reliability.

6. Mounting:

   • Follow standard surface mount technology (SMT) procedures for mounting on PCBs. Ensure proper alignment and soldering for reliable connections.

(For reference only)