Details

---

BUY MCF52223CAF66 M24E https://www.utsource.net/itm/p/8150110.html

Parameter	Description
Part Number	MCF52223CAF66 M24E
Device Type	Microcontroller
Family	ColdFire V1
Architecture	32-bit ColdFire
Core	MCF52223
Speed	Up to 72 MHz
Flash Memory	64 KB
RAM	8 KB
Data EEPROM	No
Voltage - Supply (Vcc)	3.0 V to 3.6 V
Temperature Range	-40°C to +85°C
Package Type	LQFP-64
Pin Count	64
Interfaces	UART, SPI, I2C, USB
Analog-to-Digital Converter (ADC)	10-bit, 8 channels
Timers	Multiple timers including PWM
Watchdog Timer	Yes
Power Management	Low-power modes
Operating System Support	RTOS support available

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range of 3.0 V to 3.6 V.
2. Clock Configuration: Set up the clock source and frequency as required by your application. The maximum operating frequency is 72 MHz.
3. Flash Programming: Use a compatible programmer or debugger to load code into the flash memory. Refer to the device datasheet for specific programming algorithms.
4. Peripheral Setup: Configure peripherals such as UART, SPI, I2C, and USB according to your application needs using the provided registers.
5. ADC Usage: Initialize and configure the ADC for analog measurements. Select the appropriate channel and resolution settings.
6. Timer and PWM: Configure the timers for timing operations or PWM generation as needed in your design.
7. Watchdog Timer: Enable and set up the watchdog timer to ensure system stability.
8. Power Management: Implement low-power modes to optimize power consumption based on the operational states of the microcontroller.
9. Development Tools: Utilize development tools like IDEs, compilers, and debuggers that are compatible with the ColdFire architecture for efficient development and debugging.

For detailed instructions and further information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)