Details

---

BUY MSD308BT-SW https://www.utsource.net/itm/p/8151696.html

Parameter	Description
Part Number	MSD308BT-SW
Type	Solid State Relay
Input Voltage	3.0 V to 5.5 V
Input Current	Max 20 mA
Output Voltage	0 V to 30 V (DC)
Output Current	Continuous: 8 A, Peak: 16 A (1 second)
Isolation Voltage	2500 Vrms (Input to Output)
Switching Time	Turn-On: Max 1 ms, Turn-Off: Max 1 ms
Operating Temp.	-40°C to +85°C
Storage Temp.	-55°C to +125°C
Package	DIP-8

Instructions:

1. Installation: Ensure the device is installed in a well-ventilated area to prevent overheating.
2. Power Supply: Connect the input terminals to a power supply within the specified input voltage range.
3. Load Connection: Connect the load to the output terminals ensuring the current and voltage ratings are not exceeded.
4. Heat Sinks: For applications where the relay will be operating near its maximum output current, consider using a heat sink to improve thermal performance.
5. Safety Precautions: Always disconnect power before performing any maintenance or modifications.
6. Compliance: Check local regulations for electrical safety standards and ensure compliance.
7. Handling: Handle with care to avoid damage to the pins and body of the relay.

(For reference only)