Details

---

BUY TMPZ84C015BF-8 https://www.utsource.net/itm/p/8151749.html

Parameter	Description	Specifications
Package Type	IC Package Style	SOP-8
Operating Voltage	Supply Voltage Range	2.0V to 5.5V
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Clock Frequency	Maximum Clock Frequency	20 MHz
Program Memory	Flash Program Memory Size	16KB
RAM Size	Data RAM Size	512B
Data EEPROM	EEPROM Data Memory Size	256B
I/O Ports	Number of I/O Ports	13
Timers	Number of Timers/Counters	2 (8-bit, 16-bit)
Communication Interfaces	Available Communication Interfaces	UART x 1, SPI x 1
ADC Channels	Analog-to-Digital Converter Channels	8 channels, 10-bit resolution
Interrupt Sources	Number of Interrupt Sources	17
Power Consumption	Active Mode Current	Typically 3.9mA @ 3V, 4MHz
Low Power Modes	Low Power Modes	Idle, Doze, Standby, Stop

Instructions for Use:

1. Power Supply Setup: Ensure the supply voltage is within the specified range (2.0V to 5.5V). Connect the VCC and GND pins appropriately.

2. Clock Configuration: The device can operate up to a maximum clock frequency of 20 MHz. Configure the internal or external oscillator as per application requirements.

3. Memory Management: Utilize the 16KB flash memory for program storage and the 512B RAM for data storage during operation. The 256B EEPROM can be used for non-volatile data storage.

4. I/O Port Configuration: Configure the I/O ports based on your application needs. The device supports up to 13 general-purpose I/O lines which can be set as input or output.

5. Peripheral Initialization: Initialize peripherals like timers and communication interfaces (UART, SPI) as required by your application. Refer to the datasheet for specific initialization routines.

6. ADC Usage: For analog signal processing, use the 8-channel 10-bit ADC. Configure the ADC channels and start conversions as needed.

7. Interrupt Handling: Implement interrupt routines for efficient event handling. The device supports up to 17 interrupt sources, enhancing real-time processing capabilities.

8. Power Management: Utilize low-power modes such as Idle, Doze, Standby, and Stop to optimize power consumption based on the operational state of the microcontroller.

For detailed setup and programming instructions, refer to the official TMPZ84C015BF-8 datasheet and application notes provided by the manufacturer.

(For reference only)