Details
BUY T117AD https://www.utsource.net/itm/p/8154335.html
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | T117AD |
| Type | Type of device | Optocoupler |
| Package | Package type | DIP-4 |
| Isolation Voltage (VIORM) | Maximum repetitive peak isolation voltage | 5300 Vrms |
| Collector-Emitter Voltage (VCE) | Maximum collector-emitter voltage | 80 V |
| Emitter-Collector Voltage (VEC) | Maximum emitter-collector voltage | 5 V |
| Collector Current (IC) | Maximum collector current | 50 mA |
| Forward Current (IF) | Maximum forward current (LED) | 60 mA |
| Current Transfer Ratio (CTR) | Minimum to maximum CTR | 200% to 600% |
| Power Dissipation (PD) | Maximum power dissipation | 100 mW |
| Operating Temperature Range (Toper) | Operating temperature range | -40°C to +110°C |
| Storage Temperature Range (Tstg) | Storage temperature range | -55°C to +125°C |
| Rise Time (tr) | Rise time at specified conditions | 2.5 μs |
| Fall Time (tf) | Fall time at specified conditions | 2.5 μs |
Instructions for Use:
- Handling Precautions: Handle with care to avoid damage to the leads and body. Avoid exposure to high temperatures and humidity.
- Mounting: Ensure proper alignment of the component during soldering. Soldering temperature should not exceed 260°C for more than 10 seconds.
- Electrical Connections: Connect the LED side to the control circuit and the transistor side to the load circuit as per your application requirements.
- Heat Dissipation: Ensure adequate heat dissipation if operating near maximum ratings, especially for continuous operation.
- Insulation Testing: Before use in critical applications, perform insulation testing to ensure it meets the required VIORM specifications.
- Storage: Store in a dry place away from direct sunlight and corrosive materials.
For detailed application circuits and further technical support, refer to the manufacturer's datasheet or contact the supplier.
(For reference only)View more about T117AD on main site