Details

---

BUY MAX3222CWN https://www.utsource.net/itm/p/8155628.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Operating Voltage	Vcc		4.75	5	5.25	V
Supply Current (Idle)	ICC	All drivers idle	10	30		μA
Supply Current (Active)	ICC	All drivers active	600			μA
Driver Output High	VOH	IOL = -4 mA	2.4	2.7	3.0	V
Driver Output Low	VOL	IOH = 4 mA	0	0.4	0.5	V
Input Voltage High	VIH		2.0		Vcc	V
Input Voltage Low	VIL		0		0.8	V
Data Rate				20		kbps
ESD Protection		Human Body Model		±2		kV

Instructions for MAX3222CWN:

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.75V to 5.25V.
   • Connect a bypass capacitor (typically 0.1 μF) between Vcc and GND close to the device to minimize noise.

2. Signal Lines:

   • For reliable operation, keep signal lines as short as possible to reduce noise pickup.
   • Use proper termination resistors if necessary to match the characteristic impedance of the transmission line.

3. Input Signals:

   • Apply input signals with voltages between 0V and Vcc.
   • Ensure that the input voltage levels meet the VIH and VIL specifications.

4. Output Drivers:

   • When driving loads, ensure that the output current does not exceed the maximum ratings specified by VOH and VOL.
   • If connecting to long cables or noisy environments, consider using additional filtering or isolation components.

5. Data Transmission:

   • The device supports data rates up to 20 kbps. Ensure that the baud rate settings in your system are compatible with this limit.

6. ESD Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge.
   • Use appropriate ESD protection measures during handling and installation.

7. Operating Temperature:

   • Operate the device within its specified temperature range to ensure reliability and performance.

For detailed application notes and more specific guidance, refer to the official Maxim Integrated documentation for the MAX3222CWN.

(For reference only)