Details

---

BUY PEB3264HV1.4 https://www.utsource.net/itm/p/8155848.html

Parameter	Value	Unit
Input Voltage Range	3.0 to 60	V
Output Voltage	Programmable	V
Output Current	Up to 4	A
Efficiency	Up to 95%	%
Switching Frequency	300	kHz
Operating Temperature	-40 to +85	°C
Package Type	SIP
Protection Features	Overcurrent, Overvoltage, Short

Instructions for PEB3264HV1.4:

1. Installation:

   • Ensure the input voltage is within the specified range (3.0V to 60V).
   • Connect the input power source to the designated input terminals.
   • Securely mount the device on a suitable heatsink if continuous high output current is expected.

2. Output Configuration:

   • The output voltage can be programmed using external resistors connected to the feedback pin. Refer to the datasheet for specific resistor values based on desired output voltage.

3. Operation:

   • Before applying load, verify the correct setup and configuration.
   • Gradually increase the load to the rated output current while monitoring temperature and performance.

4. Safety Considerations:

   • Always use appropriate protection devices such as fuses or circuit breakers on the input side.
   • Regularly inspect connections and components for signs of wear or damage.
   • Ensure proper ventilation to maintain operating temperature within limits.

5. Troubleshooting:

   • If the device does not start or operate correctly, check all connections and ensure the input voltage is within specifications.
   • Verify that protection features have not been triggered due to overload or other faults.

(For reference only)