Details

---

BUY UBX-G5010-ST https://www.utsource.net/itm/p/8156254.html

Parameter	Description
Product Name	UBX-G5010-ST
Type	GNSS Module
Compatibility	Supports GPS, GLONASS, Galileo, QZSS, and SBAS
Frequency Bands	L1 (1575.42 MHz)
Position Accuracy	< 3 m (95%) horizontal
Velocity Accuracy	< 0.1 m/s (95%)
Time Accuracy	< 20 ns (95%)
Update Rate	Up to 10 Hz
Cold Start Time	< 30 s
Hot Start Time	< 1 s
Supply Voltage	2.7 V to 3.6 V
Operating Current	< 45 mA
Sleep Mode Current	< 8 μA
Interface	UART, I2C, SPI
Operating Temperature	-40°C to +85°C
Dimensions	7 mm x 7 mm x 1.4 mm
Weight	0.2 g

Instructions for Use:

1. Power Supply Connection: Connect the module to a power source that provides between 2.7V and 3.6V.
2. Interface Setup: Choose one of the available interfaces (UART, I2C, or SPI) and connect accordingly.
3. Antenna Connection: Ensure a proper antenna is connected for optimal signal reception.
4. Configuration: Use UBX protocol commands to configure the module settings as needed.
5. Firmware Update: For firmware updates, refer to the official documentation provided by u-blox.
6. Testing: After setup, test the module's performance in an open sky environment to ensure it meets accuracy requirements.
7. Handling Precautions: Avoid exposing the module to excessive moisture, dust, and temperature extremes to prevent damage.

For detailed configuration and advanced features, consult the official u-blox UBX-G5010-ST datasheet and user manual.

(For reference only)