Details

---

BUY LT5521EUF#PBF https://www.utsource.net/itm/p/8192613.html
New and original

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage (VPOS)		3.3	5.5	V	Positive supply voltage
Supply Current		40		mA	Quiescent current
Gain		18		dB	Conversion gain
Noise Figure		6.5		dB	Noise figure
IP3		25		dBm	Third-order input intercept point
Input Return Loss		-12		dB	Input return loss at RF and LO ports
Output Return Loss		-12		dB	Output return loss
Operating Temperature	-40		85	°C	Operating temperature range

Instructions for LT5521EUF#PBF

1. Power Supply Connection:

   • Connect the positive supply voltage (VPOS) between 3.3V to 5.5V to the designated pin.
   • Ensure proper decoupling capacitors are placed close to the power pins to maintain stability.

2. Biasing:

   • The device is designed to operate with a quiescent current of approximately 40mA. Verify that the power supply can support this current.

3. RF and LO Signal Application:

   • Apply the RF input signal to the RF port and the local oscillator (LO) signal to the LO port.
   • Ensure that the input signals are within the specified operating conditions to avoid distortion or damage.

4. Output Handling:

   • The IF output should be connected to a suitable load impedance as per the application requirements.
   • Use appropriate filtering if necessary to isolate the desired frequency components.

5. Temperature Considerations:

   • The device is rated for operation from -40°C to +85°C. Ensure that the ambient temperature stays within these limits to maintain performance specifications.

6. PCB Layout:

   • Follow recommended PCB layout guidelines to minimize noise and interference, especially in high-frequency applications.
   • Maintain short and direct paths for critical signals such as RF, LO, and IF to reduce losses and reflections.

7. Storage and Handling:

   • Store the device in a dry environment to prevent moisture-related issues.
   • Handle with care to avoid electrostatic discharge (ESD) damage; use ESD-safe practices when handling the component.

8. Testing:

   • Before final integration into a system, perform initial tests to verify the performance parameters like gain, noise figure, and IP3 under typical operating conditions.

For detailed specifications and additional information, refer to the manufacturer's datasheet for the LT5521EUF#PBF.

(For reference only)