Details

---

BUY LT5575EUF#PBF https://www.utsource.net/itm/p/8192630.html
New and original

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range	4.75		5.25	V
Power Dissipation	Maximum power dissipation		1000		mW
Operating Temperature	Junction temperature range	-40		85	°C
Input RF Frequency	Frequency range for optimal performance	698		3800	MHz
Gain	Conversion gain		22		dB
NF	Noise figure		11		dB
IIP3	Third-order input intercept point		-10		dBm
OIP3	Third-order output intercept point		12		dBm
Isolation (LO to RF)	Isolation between LO and RF ports		35		dB
Isolation (LO to IF)	Isolation between LO and IF ports		45		dB
LO Power	Required local oscillator power		0	+3	dBm

Instructions:

1. Power Supply Requirements: Ensure the supply voltage is within the specified range of 4.75V to 5.25V to avoid damage or improper operation.
2. Temperature Considerations: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
3. Frequency Range: Use the device within the frequency range of 698 MHz to 3800 MHz for optimal performance.
4. Gain Adjustment: The conversion gain is typically around 22 dB. Adjust external components if a different gain level is required.
5. Noise Figure Management: With a typical noise figure of 11 dB, consider this in system-level noise budget calculations.
6. Intercept Points: Be mindful of the third-order intercept points (IIP3 and OIP3) when designing the circuit to minimize distortion.
7. Isolation Levels: Ensure that isolation levels meet the design requirements to prevent unwanted signal interactions.
8. Local Oscillator Power: Provide the correct LO power level (+0 to +3 dBm) as specified to achieve the best performance.

For detailed specifications and more advanced usage, refer to the datasheet provided by the manufacturer.

(For reference only)