Details

---

BUY LTC5567IUF#PBF https://www.utsource.net/itm/p/8193250.html
New and original

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage range	2.7	-	5.5	V
Output Power	Maximum output power at 1 dB compression point	-	-8	-	dBm
Noise Figure	Typical noise figure	-	4.5	-	dB
Gain	Conversion gain	-	20	-	dB
Input IP3	Third-order input intercept point	-	19	-	dBm
Input Return Loss	Return loss of the RF input port	-	15	-	dB
Output Return Loss	Return loss of the LO input port	-	15	-	dB
LO Power	Required LO drive level	-	0	+5	dBm
Operating Temperature	Temperature range for operation	-40	-	85	°C

Instructions:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
2. Biasing: Connect appropriate biasing components as recommended in the datasheet to maintain optimal performance.
3. RF Input: Connect the RF input signal ensuring it does not exceed the maximum input power to avoid distortion.
4. LO Drive Level: Set the LO drive level between 0dBm and +5dBm for best performance.
5. Temperature Range: Operate the device within the temperature range of -40°C to +85°C.
6. Installation: Mount on a PCB with proper grounding and shielding to minimize interference and ensure stability.
7. Testing: After installation, verify the output power and other parameters using calibrated test equipment.

For detailed application circuits and further information, refer to the complete datasheet provided by the manufacturer.

(For reference only)