Details

---

BUY LTC6247IKC#PBF https://www.utsource.net/itm/p/8193362.html
New and original

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vsupply	Operating Range	2.7		5.25	V
Quiescent Current	IQ	Vsupply = 3V		1.4		mA
Input Offset Voltage	VIO	TA = 25°C	-10		10	μV
Input Bias Current	IB	TA = 25°C, VIN = Vsupply/2	-5		5	nA
Input Voltage Noise	en	f = 1kHz		6.5		nV/√Hz
Slew Rate	SR	Small Signal		2		V/μs
Gain Bandwidth Product	GBP	Differential Mode		10		MHz
Output Voltage Swing	Vout	RL = 1kΩ, Vsupply = 3V	0.9		2.1	V
Common-Mode Rejection Ratio	CMRR	f = 0.1Hz to 10Hz		120		dB
Power-Supply Rejection Ratio	PSRR	f = 10Hz to 10kHz		100		dB

Instructions for Use:

1. Power Supply Connections: Ensure the supply voltage (Vsupply) is within the specified range of 2.7V to 5.25V. Connect the power supply pins correctly to avoid damage.
2. Input Signals: Keep input signals within the common-mode voltage range to prevent distortion or damage.
3. Output Load: For optimal performance, connect a load resistance (RL) of at least 1kΩ to ensure the output voltage swing remains within specified limits.
4. Noise Considerations: Be mindful of the input voltage noise when designing circuits that require low-noise performance. Place components carefully to minimize noise coupling.
5. Temperature Effects: The input offset voltage and bias current are temperature-dependent. Design your circuit considering the typical values at room temperature (25°C).
6. Stability: Ensure that the gain bandwidth product (GBP) and slew rate meet the requirements of your application to maintain stability.
7. Mounting: Follow recommended PCB layout practices for mounting the LTC6247IKC#PBF to ensure reliable operation and thermal management.

For detailed specifications and further instructions, refer to the official Linear Technology (now part of Analog Devices) datasheet for the LTC6247IKC#PBF.

(For reference only)