Details

---

BUY IRGPC40UD2 https://www.utsource.net/itm/p/8284081.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Collector-Emitter Voltage	V CES	-	-	600	V	Maximum collector-emitter voltage
Emitter-Collector Voltage	V ECS	-	-	600	V	Maximum emitter-collector voltage
Gate-Emitter Voltage	V GES	-15	-	15	V	Maximum gate-emitter voltage
Continuous Collector Current	I CES	-	40	-	A	Continuous collector current
Pulse Collector Current	I CESM	-	80	-	A	Non-repetitive peak pulse current
Power Dissipation	P TOT	-	-	250	W	Total power dissipation
Junction Temperature	T J	-	-	150	°C	Maximum junction temperature
Storage Temperature	T STG	-55	-	150	°C	Operating and storage temperature range

Instructions for Use:

1. Mounting and Handling:

   • Handle the device carefully to avoid damage to the leads or body.
   • Ensure proper heat sinking if operating near maximum power dissipation.

2. Electrical Connections:

   • Connect the gate lead directly to the control circuit to minimize stray inductance.
   • Use short, heavy gauge wires for the collector and emitter connections to reduce inductance and improve switching performance.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum allowable value.
   • Provide adequate cooling (e.g., heatsinks or forced air cooling) to maintain safe operating temperatures.

4. Overcurrent Protection:

   • Implement overcurrent protection to safeguard against excessive currents that can cause thermal runaway.

5. Gate Drive Requirements:

   • Ensure the gate drive circuitry provides sufficient voltage and current to switch the device on and off reliably.
   • Avoid exceeding the maximum gate-emitter voltage ratings.

6. Safe Operating Area (SOA):

   • Refer to the SOA graph provided in the datasheet to ensure operation within safe limits for various duty cycles and pulse durations.

7. Storage Conditions:

   • Store in a dry, cool environment to prevent damage from moisture or extreme temperatures.

8. Compliance and Standards:

   • Ensure that all applications comply with relevant safety and regulatory standards.

For detailed specifications and additional information, refer to the manufacturer's datasheet.

(For reference only)