Details

---

BUY SR5200(5pcs) https://www.utsource.net/itm/p/8371905.html

Parameter	Description	Value
Part Number	Unique identifier for the component	SR5200
Quantity	Number of units included	5 pcs
Type	Component category	Relay
Coil Voltage	Voltage required to activate the relay coil	5V DC
Coil Current	Current drawn by the coil when activated	70mA max
Contact Form	Configuration of the switch contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 125V AC / 24V DC
Insulation Voltage	Dielectric strength between terminals	1000V AC
Operating Temp.	Temperature range for reliable operation	-40°C to +85°C
Mounting Style	Method of attachment	PCB mount
Dimensions	Physical size of the component	17.5 x 12.3 x 12.2 mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a compatible PCB or using appropriate mounting hardware.
   • Verify the correct orientation before soldering to avoid damage.

2. Connection:

   • Connect the coil terminals to a 5V DC power supply for activation.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.

3. Operation:

   • When the coil is energized, the common terminal connects to the NO terminal.
   • When the coil is de-energized, the common terminal connects to the NC terminal.

4. Maintenance:

   • Avoid exposing the relay to excessive moisture, dust, or corrosive environments.
   • Periodically inspect connections and mounting for integrity.

5. Safety:

   • Do not exceed the contact rating to prevent damage or failure.
   • Ensure proper insulation and spacing to avoid electrical hazards.

(For reference only)