Details

---

BUY NS2009 https://www.utsource.net/itm/p/8377901.html

Parameter	Description
Part Number	NS2009
Type	Operational Amplifier
Supply Voltage	±1.5V to ±18V (or 3V to 36V single supply)
Input Offset Voltage	2mV typical, 6mV max
Input Bias Current	45nA typical, 150nA max
Slew Rate	0.3V/μs
Bandwidth	1.1MHz (Unity Gain)
Output Current	20mA
Operating Temperature	-40°C to +85°C
Package	SOIC-8, PDIP-8

Instructions for Use:

1. Power Supply Connection:

   • Connect the power supply to the V+ and V- pins. Ensure that the voltage is within the specified range of ±1.5V to ±18V or 3V to 36V for single supply operation.

2. Input Signal:

   • Apply the input signal to the non-inverting (+) and inverting (-) input pins. Be mindful of the input offset voltage when designing your circuit.

3. Feedback Network:

   • For stable operation, especially at higher frequencies, use appropriate feedback resistors to set the gain and ensure stability.

4. Output Load:

   • Connect the output load to the output pin. The maximum current that can be sourced or sunk by the op-amp is 20mA.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.

6. PCB Layout:

   • Place decoupling capacitors close to the power supply pins to minimize noise and improve stability.

7. Handling Precautions:

   • The NS2009 is sensitive to electrostatic discharge (ESD). Handle with care and follow ESD handling procedures during assembly.

(For reference only)