Details

---

BUY IR2108STRPBF https://www.utsource.net/itm/p/8383550.html

Parameter	Description	Value
Device	High and Low Side Driver	IR2108STRPBF
Package Type	Package	SO-8
Supply Voltage (Vcc)	Operating voltage range for the supply pin	10V to 20V
Logic Supply Voltage (Vdd)	Operating voltage range for the logic supply pin	4.5V to 20V
Input Capacitance (Ciss)	Capacitance at input pin	6nF
Propagation Delay	Time delay between input and output	90ns typ
Undervoltage Lockout (UVLO)	Threshold voltage below which the device will not operate	Vdd: 8.5V, Vcc: 8.5V
Operating Temperature Range	Ambient temperature range in which the device can operate	-40°C to +85°C
Maximum Junction Temperature	Maximum allowable junction temperature	150°C
Output Current (Iout)	Continuous output current	±1A

Instructions for Use:

1. Power Supply Connection: Connect Vcc to the high-side power supply and Vdd to the logic power supply. Ensure both supplies are within their specified operating ranges.
2. Ground Connections: Properly connect all ground pins (COM, Source) to ensure stable operation.
3. Input Signal: Apply the control signal to the IN pin. The driver responds to this signal to drive the output MOSFETs.
4. Bootstrap Capacitor: For high-side driving, use a bootstrap capacitor connected between the Boot and Source pins.
5. Dead-Time Insertion: Implement dead-time between high-side and low-side switching to prevent shoot-through current.
6. Heat Dissipation: Keep the junction temperature within limits by providing adequate heat sinking if necessary.
7. Protection Circuits: Utilize external protection circuits like flyback diodes for inductive loads.
8. Signal Integrity: Ensure short and impedance-matched PCB traces for high-frequency signals to minimize noise and interference.

For detailed application notes and more specific design considerations, refer to the manufacturer's datasheet.

(For reference only)