Details

---

BUY OB2532MP https://www.utsource.net/itm/p/8401636.html

Parameter	Description	Value
Part Number	Device Part Number	OB2532MP
Type	Type of Device	Optical Sensor
Supply Voltage	Operating Voltage Range	2.7V to 5.5V
Output Type	Digital Output Type	Open-Drain
Operating Temp	Operating Temperature Range	-40°C to 85°C
Sensitivity	Light Sensitivity	Adjustable
Interface	Communication Interface	I2C
Package	Component Package Type	SOP-8

Instructions for OB2532MP

1. Power Supply Connection:

   • Connect the VDD pin to a power supply between 2.7V and 5.5V.
   • Ensure the GND pin is connected to the system ground.

2. Interface Setup:

   • The OB2532MP uses an I2C interface for communication.
   • Connect the SDA (Data) and SCL (Clock) pins to your microcontroller's I2C lines.
   • Use pull-up resistors on the SDA and SCL lines as required by the I2C protocol.

3. Configuration:

   • Configure the sensor using the I2C commands to set parameters such as sensitivity and operating modes.
   • Refer to the device datasheet for specific command codes and configuration registers.

4. Operation:

   • Once configured, the sensor can be polled or set up to trigger interrupts based on detected light levels.
   • Process the digital output from the sensor according to your application requirements.

5. Handling Precautions:

   • Avoid exposing the sensor to voltages outside its specified range to prevent damage.
   • Ensure proper handling of static-sensitive components during installation.

(For reference only)