Details

---

BUY TL494CDR(5pcs) https://www.utsource.net/itm/p/8403276.html

Parameter	Description	TL494CDR Specifications
Package Type	The type of packaging used for the component	DIP-16
Quantity	Number of units in a single order	5 pcs
Operating Voltage	Range of voltages at which the device can operate	4.5V to 40V
Operating Temperature	Temperature range for operation	-25°C to +85°C
Frequency Range	Frequency range supported by the device	Up to 300 kHz
Output Current	Maximum current that can be sourced or sunk	200 mA
Duty Cycle Range	Adjustable duty cycle range	0% to 100%
Error Amplifier	Number of error amplifiers included	2
Dead Time Control	Feature to prevent cross-conduction	Yes
Shutdown Pin	Presence of a shutdown pin for power control	No

Instructions for Use:

1. Power Supply Connection: Connect the appropriate power supply voltage (4.5V to 40V) to the Vcc and GND pins.
2. Input Configuration: Configure the input pins according to your application requirements, using external components like resistors and capacitors for timing and control.
3. Output Configuration: Set up the output stage by connecting external transistors or MOSFETs if higher current drive is needed.
4. Adjusting Frequency and Duty Cycle: Use external RC networks connected to the timing pins to adjust the frequency and duty cycle as required.
5. Error Amplifier Usage: Utilize the two built-in error amplifiers for feedback control in your circuit design.
6. Protection Measures: Ensure proper heat sinking if operating at high currents or temperatures to avoid overheating.
7. Testing: After assembly, test the circuit under load conditions to ensure stable operation within specified parameters.

For detailed schematics and further technical information, refer to the official datasheet provided by the manufacturer.

(For reference only)