Details

---

BUY AOD2610E https://www.utsource.net/itm/p/8411859.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Drain-Source On-State Resistance	RDS(on)	VGS = 4.5V, ID = 1A	-	80	-	mΩ
Gate Threshold Voltage	VGS(th)	ID = 250μA	0.8	1.2	1.6	V
Continuous Drain Current	ID	Tc = 25°C	-	-	3.9	A
		Tc = 70°C	-	-	2.9	A
Power Dissipation	PD	Ta = 25°C	-	-	0.5	W
Total Power Dissipation	PD	TJ = 150°C	-	-	0.34	W
Junction Temperature	TJ		-55	-	150	°C
Storage Temperature Range	Tstg		-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the AOD2610E with care to avoid damage to the leads or body.
   • Ensure proper alignment during mounting to prevent misalignment issues.

2. Electrical Connections:

   • Connect the drain (D), gate (G), and source (S) terminals correctly.
   • Verify that the gate voltage does not exceed the maximum ratings to prevent damage.

3. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum current limits.
   • Consider using a heatsink if continuous operation at high currents is required.

4. Operating Conditions:

   • Do not exceed the maximum junction temperature of 150°C.
   • Operate within specified electrical parameters to ensure reliable performance.

5. Storage:

   • Store in a dry environment within the storage temperature range (-55°C to 150°C).
   • Avoid exposure to corrosive environments.

6. Testing:

   • Perform initial testing under controlled conditions to validate the device's performance.
   • Monitor temperature and current levels during testing to ensure safe operation.

(For reference only)