Details

---

BUY AD8607ARZ-REEL7 https://www.utsource.net/itm/p/8417901.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vsupply		2.7		5.5	V
Quiescent Current	IQ	VS = 5V		10		μA
Input Offset Voltage	VOS	VS = 5V, TA = 25°C	-20	0	+20	μV
Input Bias Current	IB	VS = 5V, TA = 25°C	-1	0	+1	pA
Input Voltage Noise	en	f = 1kHz		13		nV/√Hz
Slew Rate	SR	VS = 5V		0.4		V/μs
Bandwidth (Small Signal)	BW	VS = 5V		1.6		MHz
Output Voltage Swing	Vout	RL = 10kΩ, VS = 5V	0.2		4.8	V

Instructions for AD8607ARZ-REEL7

1. Supply Voltage:

   • Operate the device within the supply voltage range of 2.7V to 5.5V to ensure stable operation.

2. Quiescent Current:

   • The quiescent current is typically 10 μA at a supply voltage of 5V. Ensure that power consumption requirements are met in your design.

3. Input Offset Voltage:

   • The input offset voltage should be within ±20 μV at room temperature and with a supply voltage of 5V. Adjust any gain settings accordingly to minimize errors.

4. Input Bias Current:

   • With an input bias current of ±1 pA, this op-amp is suitable for high impedance applications.

5. Input Voltage Noise:

   • The typical input voltage noise is 13 nV/√Hz at 1 kHz. Use appropriate filtering if noise performance is critical.

6. Slew Rate:

   • The typical slew rate is 0.4 V/μs. This parameter affects the ability of the amplifier to reproduce fast-changing signals accurately.

7. Bandwidth:

   • The small-signal bandwidth is typically 1.6 MHz. Consider this when designing circuits that require high-frequency response.

8. Output Voltage Swing:

   • The output can swing from 0.2V to 4.8V with a load resistance of 10kΩ and a supply voltage of 5V. Ensure that the output voltage levels are compatible with downstream components.

For detailed specifications and additional information, refer to the official datasheet provided by Analog Devices.

(For reference only)