Details

---

BUY KIA78R12PI-CU/P https://www.utsource.net/itm/p/8422671.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	10	-	35	V
Output Voltage	VOUT	Fixed	-	12	-	V
Output Current	IOUT	Continuous	-	1.5	-	A
Dropout Voltage	VDROPOUT	IOUT = 1.5A	-	1.8	-	V
Quiescent Current	IQ	VIN = 35V, no load	-	5	-	mA
Line Regulation	RL	VIN = 10V to 35V	-	0.01	-	%
Load Regulation	RL	IOUT = 0 to 1.5A	-	0.5	-	%
Ripple Rejection	RR	f = 120Hz	-	70	-	dB
Operating Temperature	TOPR	Storage	-40	-	85	°C

Instructions for Use:

1. Input Connection: Connect the input voltage (VIN) between the input pin and ground. Ensure that the input voltage is within the specified range of 10V to 35V.
2. Output Connection: The output pin provides a regulated 12V output. Connect this pin to your load through appropriate wiring.
3. Grounding: Ensure a solid connection to ground for both input and output circuits to maintain stability and performance.
4. Heat Dissipation: For continuous operation at full load, consider providing adequate heat sinking to manage thermal conditions, especially if operating near the upper limit of the input voltage range.
5. Capacitors: While not mandatory, adding bypass capacitors (e.g., 0.1μF ceramic) close to the input and output pins can improve transient response and reduce noise.
6. Polarity: Pay attention to the polarity of connections; reverse polarity can damage the regulator.
7. Storage and Handling: Store in a dry environment and handle with care to avoid damage from electrostatic discharge (ESD).

(For reference only)